Why the Upgrade?
Shares of Brooks Automation have risen by 7.96% since the company reported its second quarter of fiscal 2013 (ended Mar 31) results on May 9. Adjusted earnings per share were 1 cent below 20 cents earned in the year-ago quarter but an improvement over a 6 cent loss in the previous quarter. Also, the results surpassed the Zacks Consensus Estimate of a 3 cent loss per share by 133.3%.
Sequentially, revenue grew 19%, reflecting soaring demand for front end semiconductor products. Order bookings stood at $121.3 million, up 31% sequentially. Talking of margins, adjusted gross margin in the quarter improved 20 basis points sequentially and came in at 32.1%.
For fiscal 2013, management of Brooks Automation anticipates revenue to be within the $116-$124 million range and non-GAAP earnings per share to be within the 1 cent-5 cents range. At mid points, revenue guidance reflects a 2.6% sequential growth while earnings guidance reflects 200% sequential growth.
Best Railroad Stocks To Own Right Now: Micron Technology Inc.(MU)
Micron Technology, Inc., together with its subsidiaries, engages in the manufacture and marketing of semiconductor devices worldwide. Its products include dynamic random access memory (DRAM) products that provide data storage and retrieval, which include DDR2 and DDR3; and other specialty DRAM memory products, including DDR, SDRAM, DDR and DDR2 mobile low power DRAM, pseudo-static RAM, and reduced latency DRAM. The company also offers NAND flash memory products, which are electrically re-writeable and non-volatile semiconductor devices that retain content when power is turned off. In addition, it provides NOR flash memory products that are electrically re-writeable and non-volatile semiconductor memory devices; phase change memory products; and image sensor products. Micron Technology?s products are used in a range of electronic applications, including personal computers, workstations, network servers, mobile phones, flash memory cards, USB storage devices, digital still c ameras, MP3/4 players, and in automotive applications. It sells its products to original equipment manufacturers and retailers through internal sales force, independent sales representatives, and distributors, as well as through a Web-based customer direct sales channel. The company was founded in 1978 and is headquartered in Boise, Idaho.
Advisors' Opinion:- [By Garrett Cook]
Micron Technology (NASDAQ: MU) shares were also up, gaining 4.64 percent to $32.71 after the company reported better-than-expected fiscal third-quarter earnings. Micron posted its adjusted earnings of $0.79 per share, beating analysts’ estimates of $0.69 per share.
- [By Jayson Derrick]
Analysts at Credit Suisse maintained an Outperform rating on Micron Technology (NASDAQ: MU) with a $30 price. Shares lost 5.92 percent, closing at $22.58.
Top Semiconductor Stocks To Invest In 2014: Intermolecular Inc (IMI)
Intermolecular, Inc. (Intermolecular), incorporated on June 16, 2004, is engaged in research and development and time-to-market for the semiconductor and clean-energy industries. The Company, through paid collaborative development programs (CDPs) with its customers, develops technology and intellectual property (IP) for its customers focused on advanced materials, processes, integration and device architectures. The Company provides its customers with technology through various fee arrangements and grants them rights to associated IP, primarily through royalty-bearing licenses. Through paid CDPs and its own development, the Company has established a portfolio of greater than 1,000 patents and patent applications. Its approach is broadly applicable to high-volume integrated device markets, which include the markets for semiconductors, flat glass coatings and glass-based devices, solar cells, light-emitting diodes (LEDs), flat-panel displays, advanced batteries and other energy efficiency applications.
As of December 31, 2012, the Company targets large, high-volume semiconductor and high-growth emerging clean energy markets, including DRAM, non-volatile memory (including flash memory and embedded memory), complex logic, flat glass coatings and glass-based devices, solar cells, LEDs and other energy efficiency applications. The Company�� customers include ATMI, Inc. (ATMI), Elpida Memory, Inc. (Elpida), First Solar. Inc. (First), GLOBALFOUNDRIES Singapore Pte. Ltd (GLOBALFOUNDRIES), Guardian Industries Corp. (Guardian), SanDisk Corporation (SanDisk), Taiwan Semiconductor Manufacturing Company (TSMC) and Toshiba Corporation (Toshiba). For the year ended December 31, 2012, the Company has received the majority of its revenue from customers in DRAM, flash memory, complex logic and energy-efficient applications in flat glass. The elements in HPC platform include Tempus HPC processing, automated characterization, and informatics and analysis software. Tempus HPC processing are used to process ! different experiments consisting of combinations of materials, processing parameters, sequencing and device structures. Automated characterization systems are used to characterize the substrates processed by its Tempus HPC processing tools. Informatics and analysis software are used to automate experiment generation, characterization, data analysis and reporting.
The Company�� HPC platform consists of its Tempus HPC processing tools, automated characterization and informatics and analysis software. The Company�� platform is purpose-built for Research and Development (R and D) using combinatorial process systems. Combinatorial processing is a methodology for discovery and development that employs parallel and other high-throughput experimentation, which allows R and D experimentation to be performed at speeds up to 100 times faster than traditional methods. The Company�� processing tools allows performing up to 192 experiments on a single substrate.
Advisors' Opinion:- [By Sofia Horta e Costa]
ARM Holdings Plc (ARM) lost 2.6 percent, leading European technology companies lower before it publishes half-year results next week. IMI Plc (IMI) gained 2 percent as Citigroup Inc. listed the engineering company among its most preferred stocks.
Top Semiconductor Stocks To Invest In 2014: ARM Holdings PLC (ARMH)
ARM Holdings plc (ARM), incorporated on October 16, 1990, designs microprocessors, physical intellectual property (IP) and related technology and software, and sells development tools. As of December 31, 2012, the Company operated in three business segments: the Processor Division (PD), the Physical IP Division (PIPD) and the System Design Division (SDD). ARM licenses and sells its technology and products to international electronics companies, which in turn manufacture, markets and sells microprocessors, application-specific integrated circuits (ASICs) and application-specific standard processors (ASSPs) based on ARM�� technology to systems companies for incorporation into a range of end products. It also licenses and sells development tools directly to systems companies and provides support services to its licensees, systems companies and other systems designers.
ARM processor architecture and physical IP is used in embedded microprocessor applications, including cellular phones, digital televisions, mobile computers and personal computer peripherals, smart cards and microcontrollers. ARM�� principal geographic markets are Europe, the United States and Asia Pacific. ARM�� product offering includes microprocessor Cores: RISC microprocessor cores, including specific functions, such as video and graphics IP and on-chip fabric IP; embedded software; physical IP; development tools, and support and maintenance services.
Processor Division
The PD encompasses those resources that are centered on microprocessor cores, including specific functions, such as graphics IP, fabric IP, embedded software IP and configurable digital signal processing (DSP) IP. Service revenues consist of design consulting services and revenues from support, maintenance and training.
Physical IP Division
The PIPD is focused on building blocks for translation of a circuit design into actual silicon. During the year ended December 31, 2012, the Company�� total av! erage PIPD headcount was 557. ARM is a provider of physical IP components for the design and manufacture of integrated circuits, including systems-on-chip (SoCs). ARM Artisan physical IP products include embedded memory, standard cell and input/output components. Artisan physical IP also includes a limited portfolio of analog and mixed-signal products. ARM�� physical IP components are developed for a range of process geometries ranging from 20 nanometer - 250 nanometer. ARM licenses its products to customers for the design and manufacture of integrated circuits used in complex, high-volume applications, such as portable computing devices, communication systems, cellular phones, microcontrollers, consumer multimedia products, automotive electronics, personal computers and workstations and many others.
ARM�� embedded memory components include random access memories, read only memories and register files. These memories are provided in the form of a configurable memory compiler, which allows the customer to generate the appropriate configuration for the given application. ARM�� memory components include many configurable features, such as power-down modes, low-voltage data retention and fully static operation, as well as different transistor options to trade off performance and power. In addition, ARM�� memory components include built-in test interfaces that support the industry test methodologies and tools. ARM memory components also offer redundant storage elements.
ARM�� memory components are designed to enable the chip designer maximum flexibility to achieve the optimum power, performance, and density trade-off. ARM offers standard cell components that are optimized for high performance, high density or ultra high density. ARM logic products deliver optimal performance, power and area when building ARM Processors, Graphics, Video and Fabric IP along with general SoC subsystem implementation. ARM delivers physical interface for a range of DDR SDRAM (double-data rate s! ynchronou! s dynamic random-access memory) applications ranging from mission critical applications to low-power memory sub-systems. Silicon on Insulator (SOI) products is an alternative methodology to traditional semiconductor fabrication techniques.
System Design Division
The SDD is focused on the tools and models used to create and debug software and system-on-chip (SoC) designs. ARM�� software development tools help a software design engineer deliver products right the first time. Engineers use these tools in the design and deployment of code, from applications running on open operating systems right through to low-level firmware. The ARM Development Studio is a hardware components that allow the software designer to connect to a real target system and control the system for the purposes of finding errors in the software. The ARM DSTREAM unit allows the software developer to control the software running on the prototype product and examine the internal state of the prototype product. ARM Development Boards are ideal systems for prototyping ARM-based products. The ARM Microcontroller Development Kit supports ARM-based microcontrollers and 8051-based microcontrollers from companies, such as Analog Devices, Atmel, Freescale, Fujitsu, NXP, Samsung, Sharp, STMicroelectronics, Texas Instruments and Toshiba. The ARM Microcontroller Development Kit is used by developers who are building products and writing software using standard off-the-shelf microcontrollers.
The ARM Microprocessor Families
ARM architecture processors offers a range of performance options in the ARM7 family, ARM9 family, ARM11 family, ARM Cortex family and ARM SecurCore family. The ARM architecture gives systems designers a choice of processor cores at different performance/price points. The ARM7 offers 32-bit architecture capable of operating from 8/16-bit memory on an 8/16-bit bus through the implementation of the Thumb instruction set. The ARM9 family consists of a range of microprocessors in ! the 150-2! 50MHz range. Each processor has been designed for a specific application or function, such as an application processor for a feature phone or running a wireless fidelity (WiFi) protocol stack. The ARM9 family consists of a range of microprocessors in the 150-250 megahertz range. The ARM11 family consists of a range of microprocessors in the 300-600 megahertz range. ARM Cortex family is ARM�� family of processor cores based on version 7 of the ARM Architecture. The family is split into three series: A Series, A Series and M Series.
Advisors' Opinion:- [By Jessica Alling]
Intel (NASDAQ: INTC ) is right behind HP, with a 1.62% drop as of this writing. Intel may be on the receiving end of the negative backlash against HP, since the device maker's recently introduced new line of laptops uses Intel processors. Otherwise, the chip maker has been getting a variety of positive news. Its battle with ARM Holding (NASDAQ: ARMH ) is looking like it might finally swing in Intel's favor, as ARM's stranglehold on the mobile and tablet markets may finally be loosening. Intel is providing the processors and chips for a variety of new devices that will push it further into the market, eating away at ARM's dominance.
Top Semiconductor Stocks To Invest In 2014: Applied Materials Inc.(AMAT)
Applied Materials, Inc. provides manufacturing equipment, services, and software to the semiconductor, flat panel display, solar photovoltaic (PV), and related industries worldwide. The company?s Silicon Systems Group segment offers a range of manufacturing equipment used to fabricate semiconductor chips or integrated circuits. This segment provides systems that perform primary processes used in chip fabrication, including atomic layer deposition, chemical vapor deposition, physical vapor deposition, electrochemical deposition, rapid thermal processing, chemical mechanical planarization, wet cleaning, and wafer metrology and inspection, as well as systems that etch or inspect circuit patterns on masks used in the photolithography process. Its Applied Global Services segment offers products and services designed to enhance the performance and productivity, and reduce the environmental impact of the fab operations of semiconductor, liquid crystal displays (LCDs), and solar P V manufacturers. The company?s Display segment provides products for manufacturing thin film transistor LCDs for televisions, personal computers (PCs), tablet PCs, smartphones, and other consumer-oriented electronic applications. Its Energy and Environmental Solutions segment offers manufacturing systems for the generation and conservation of energy, as well as manufacturing solutions for wafer-based crystalline silicon applications. This segment also provides roll-to-roll vacuum Web coating systems for deposition of a range of films on flexible substrates for functional, aesthetic, or optical properties; and roll-to-roll machine for depositing ultra-thin aluminum films for flexible packaging applications. The company serves manufacturers of semiconductor wafers and chips, flat panel LCDs, solar PV cells and modules, and other electronic devices. Applied Materials, Inc. was founded in 1967 and is headquartered in Santa Clara, California.
Advisors' Opinion:- [By Luke Jacobi]
Applied Materials (NASDAQ: AMAT) rose 9.06 percent to $17.44 after the company announced its plans to acquire Tokyo Electron in an all-share deal.
- [By Rex Crum]
Semiconductor-equipment maker Applied Materials Inc. (AMAT) �rose more than 7%, to $17.14, after the company said it would acquire Tokyo Electron Ltd. in an-all stock deal. Applied Materials Chief Executive Gary Dickerson will be CEO of the combined company.
- [By Markus Aarnio]
Lam Research's competitors include Applied Materials (AMAT). Here is a table comparing these two companies.
CompanyLRCXAMATMarket Cap:8.94B21.30BEmployees:6,60014,526Qtrly Rev Growth (yoy):0.33-0.16Revenue:3.60B7.17BGross Margin:0.410.39EBITDA:501.00M1.08BOperating Margin:0.050.09Net Income:113.88M-442.00MEPS:0.66-0.37P/E:82.98N/APEG (5 yr expected):0.393.28P/S:2.402.99Lam Research is trading at a lower P/S ratio than its direct competitor. In Applied Materials, there have been 1,963,113 shares sold and there have been zero shares purchased by insiders this year. Only Lam Research has seen intensive insider selling during the past 30 days.
- [By Ben Axler]
We also note there has been a healthy pace of M&A consolidation in the semiconductor capital equipment industry in the past few years. For example, ASML Holdings (ASML) recently acquired Cymer and Tokyo Electron Ltd. (TYO: 8038) acquired FSI International. Lastly, we noted previously that Applied Materials (AMAT) acquired Varian Semiconductor in 2011, a close competitor to Axcelis. Our analysis suggests that the minimum valuation for a company in the industry is 1.2x, 11.0x and 2.2x revenues, EPS, and tangible book value, respectively. Furthermore, the average premium paid to the stock price has been a minimum of 35%.
Top Semiconductor Stocks To Invest In 2014: Aixtron SE (AIXG)
AIXTRON SE (AIXTRON), formerly AIXTRON AG, incorporated in 1983, is a provider of deposition equipment equipment to the semiconductor and compound-semiconductor industry. The Company's technology solutions are used by a diverse range of customers worldwide to build advanced components for electronic and opto-electronic applications based on compound, silicon, or organic semiconductor materials. Such components are used in fiber optic communication systems, wireless and mobile telephony applications, optical and electronic storage devices, computing, signaling and lighting, displays, as well as a range of other technologies. AIXTRON's business activities include developing, producing and installing equipment for coating semiconductor materials, process engineering, consulting and training, including ongoing customer support. AIXTRON supplies to customers both full production-scale complex material deposition systems and small scale systems for research and development (R&D) use and small-scale production use.
AIXTRON's product range includes customized production and research scale compound semiconductor systems capable of depositing material films on up to 95 * two-inch diameter wafers per single production run, or smaller multiples of larger diameter wafers, employing MOCVD or Hydride Vapor Phase Epitaxy (HVPE) or organic thin film deposition on up to Gen. 3.5 substrates, including Polymer Vapor Phase Deposition (PVPD) or Organic Vapor Phase Deposition (OVPD) or large area deposition for Organic Light Emitting Diodes (OLED) applications or Plasma Enhanced Chemical Vapor Phase Deposition (PECVD) for depositing complex Carbon Nanostructures (Carbon Nanotubes, Nanowires or Graphene). AIXTRON also manufactures full production and research scale deposition systems for silicon semiconductor applications capable of depositing material films on wafers of up to 300 millimeters diameter, employing technologies, such as Chemical Vapor Deposition (CVD), Atomic Vapor Deposition (AVD) and Atomic Layer! Deposition (ALD).
AIXTRON also offers a range of peripheral equipment and services, including products capable of monitoring the concentration of gases in the air and for cleaning the exhaust gas from metal organic chemical vapor deposition processes. The Company also assists its customers in designing the production layouts for the gas supply to thin film deposition systems. Additionally, the Company offers its customers training, consulting and support services.
The Company competes with Veeco Instruments Inc. (USA), Taiyo Nippon Sanso (Japan), Ulvac, Inc. (Japan), Tokki Corporation (Japan), Sumitomo (Japan), Applied Materials, Inc. (USA), Doosan DND Co., Ltd. (South Korea), Sunic System (South Korea), Tokyo Electron Ltd. (Japan), ASM International N.V. (Netherlands), IPS Technology (South Korea), Jusung Engineering Co. Ltd. (South Korea), and Hitachi Kokusai Electric Co. Inc. (Japan).
Advisors' Opinion:- [By Jon C. Ogg]
Aixtron SE (NASDAQ: AIXG) was downgraded to Sell from Hold at Canaccord Genuity.
Buffalo Wild Wings Inc. (NASDAQ: BWLD) was downgraded to Outperform from Strong Buy at Raymond James.
Top Semiconductor Stocks To Invest In 2014: NextStage Inc (NXT)
NextStage, Inc. is a holding company. The Company is engaged in the management of its investments in shares of stocks of its subsidiaries. The Company�� subsidiaries include Mondex Philippines Inc. (MXP), Infinit-e Asia Inc. (Infinit-e Asia) and Technology Support Services, Inc. (TSSI). MXP operates a multi-application smart card system in Philippines. Infinit-e Asia is a software development company specializing on smart card and e-commerce solutions tailored to enhance the business of its clients. Infinit-e Asia develops smart card solutions for both real and online applications and on both contact and contactless platform. Infinit-e Asia�� spectrum of products and applications are classified as payments, data capture and security. TSSI is engaged in the business of business process outsourcing (BPO), applications service providers (ASP) and managed service providers (MSP). Advisors' Opinion:- [By Namitha Jagadeesh]
HSBC Holdings Plc (HSBA), Europe�� largest bank, slid 2.1 percent. International Consolidated Airlines Group SA (IAG) declined 2 percent as it canceled some of its flights following a disruption caused by one of its planes at Heathrow airport. Next Plc (NXT) retreated 2.4 percent as Morgan Stanley cut its recommendation on the shares.
Top Semiconductor Stocks To Invest In 2014: NeoPhotonics Corp (NPTN)
NeoPhotonics Corporation, incorporated on October 31, 1996, is a designer and manufacturer of photonic integrated circuit (PIC)-based modules and subsystems for bandwidth-intensive, high-speed communications networks. The Company has a portfolio of over 300 products, including products that enable data transmission at 10 gigabytes per second, 40 gigabytes per second and 100 gigabytes per second, agility products, such as reconfigurable optical add/drop multiplexers (ROADMs) that allocate bandwidth to adjust for volatile traffic patterns, and access products that provide high-bandwidth connections to more devices and people over fixed and wireless networks. In October 2011, the Company acquired Santur Corporation. In June 2013, it announced first shipments of optical transceiver modules out of its new, high capacity factory in Dongguan, Guangdong Province, China.
The Company�� products are categorized in 34 product families. The Company sells its products to the network equipment vendors globally, including ADVA AG Optical Networking Ltd., Alcatel-Lucent SA, Ciena Corporation (including its recent acquisition of Nortel�� Metro Ethernet Networks business), Cisco Systems, Inc., FiberHome Technologies Group, ECI Telecom Ltd., Telefonaktiebolaget LM Ericsson, Fujitsu Limited, Harmonic, Inc., Huawei Technologies Co., Ltd., Mitsubishi Electric Corporation, NEC Corporation, Nokia Siemens Networks B.V. and ZTE Corporation.
The Company competes with Finisar Corporation, JDS Uniphase Corporation, MRV Communications, Inc., NTT Electronics Corporation and Sumitomo Electric Device Innovations, Inc.
Advisors' Opinion:- [By Anders Bylund]
Close competitor NeoPhotonics (NYSE: NPTN ) soared 15% higher. Larger rival JDS Uniphase (NASDAQ: JDSU ) jumped 7.9% to become the fastest gainer on the S&P 500. If Ciena can beat its own expectations in selling Internet backbone equipment to a bevy of major telecoms, its chief rivals must eventually follow suit. JDS is only one month removed from its latest quarterly report, which sent shares diving 7% overnight (but all was forgiven a week later). NeoPhotonics also reported in early May, but didn't make any waves then.
No comments:
Post a Comment